Black and Decker Auto Feed Spools

Auto Feed Single Line Spool

Part Number: SF-080

Order within the next 8 hours

and your part ships today!

*This part replaces obsolete part #: 90588459N.

Product Information

Manufacturer: Black and Decker

Product Number: SF-080

Classification: Accessory

Weight: 0.11 lbs.

Shipping: Ships Worldwide

Description:

This is Genuine OEM replacement part designed for use with Black and Decker String Trimmers. It is the part of the String Trimmer that contains the cutting line. It is made out of Plastic and it is sold individually. Please note the Spool Housing and the Cap are both Sold Separately.

When Replacing this item you will not need any tools.

• Depress the tabs and remove the spool cap from the spool housing on the trimmer head
• Grasp empty spool with one hand and spool cap with other hand and pull spool out
• Replace the Spool Assembly
• Insert the lines onto the exit holes on the hub
• Align the notches with the line exit holes
• Press the spool gently into the spool cap and rotate it until you feel it drop into place.
• Then push to snap into place. (When in place, the spool will turn a few degrees left and right freely)
• Align the spool cap tabs with the slots on the spool housing
• Snap the spool cap back on by depressing lugs and pressing into spool housing

NOTE: The line should protrude approximately 4-13/16inches (122mm) from the housing.

Frequently Purchased With

Compatibility

This part is compatible with the following machines:

Products Compatibility

This item works with the following types of products:

• • Trimmer

Questions & Answers

---

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

8 of 8 people found this instruction helpful

Time Spent Repairing:

Less than 15 minutes

(First this part is for a string trimmer not a hedge trimmer) Worn spool

Press on the sides of the cap and pull it out. Remove the old spool. Install the new spool and let some of the line out of the upper housing. Press the cap back on and you're done

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Time Spent Repairing:

Less than 15 minutes

Cap was broken need replace ordered and problem solved

Remove the old spool and then installed the new one, and thread some of the line out of the spool housing. Then line up the tabs on the cap to the slots in the spool housing and press it in.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Hand replaced spool and cap

Trimmer feed and cut line up and my legs.

Removed old cap and spool and replaced with new ones. They work as new ones. I have had this trimmer for several years and it just started to not feed the line out and then would feed it out and cut into small pieces. Also cut my leg and ankle. The new cap and spool worked and fixed this problem.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Time Spent Repairing:

Less than 15 minutes

Spool cracked

Threw away broken part. Replacement part fit perfectly.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Time Spent Repairing:

Less than 15 minutes

Needed new spool

Took out used one replaced with new one eady

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, OPTIONAL: 4mm Allen wrench, 5/16 in

The string trimmer's string got wrapped around some stuff and seized, breaking the spool housing's plastic collar

Detach string spool from spool housing.
OPTIONAL (to lube driveshaft): loosen collar's screw (4mm Allen wrench and 5/16 in socket).
Remove screw securing spool housing to shaft (Phillips head).
Pull out spool housing.
OPTIONAL (to lube driveshaft): detach guard from shaft, pull out driveshaft, wipe clean, and apply grease.
Insert new spool housing.
Install & tighten screw securing spool housing to shaft (Phillips head).
OPTIONAL (if lubed driveshaft): tighten collar (4mm Allen wrench and 5/16 in socket).

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, No tools needed

Weed eater cord spool broke

Removed broken spool and replaced it with new spool

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Time Spent Repairing:

Less than 15 minutes

The old lever broke and no one locally carried parts

Replaced the lever and put on new string reel and went to work. Took maybe 5 minutes.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, No tools needed

The spoil on my weed trimmer was broken, E replacement had replacement part exactly matched the broken one .

Removed the old spool and replaced it with new one. It is very easy.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Time Spent Repairing:

Less than 15 minutes

Cap was worn out from being drug on ground

Removed and discarded old cap
Inserted spool in cap
Placed cap on trimmer

Did you find this story helpful?

Thanks for voting and helping fellow customers!

show more

Reviews

Average Rating (out of 5):

27 Reviews

Click to filter by ratings:

Showing reviews with 4 stars. Show All Reviews

Sort by:

• Highest Rating
• Most Recent

Good Service

The parts were received quickly. I would order from you again. Thanks!

Guest - June 23, 2022 Verified Purchase

These spools arrive ready to use,

The spools arrived in just a few days.

Guest - April 15, 2022 Verified Purchase

Super Easy to Find Right Part

I needed a new auto feed line on my weed eater. Going to the big stores was a waste of time. With ereplacement parts online I found the exact OEM part I needed within minutes. Thanks for making your site so easy to navigate! God bless you!

Guest - September 14, 2021 Verified Purchase

Weed trimmer

Arrived earlier than expected fits and works great

Guest - September 6, 2021 Verified Purchase

Easy repair,good part

Llegó rápido, en buenas condiciones. Volvería a comprar en el futuro.

Juan - August 23, 2021 Verified Purchase

great parts that fit and work

Great

Guest - July 25, 2021 Verified Purchase

Great part

New replacement spool which can't be found even at the place we bought the weed eater from! Ereplacement is the go to place to go. Always has what we need and fast shipment.

Susan - July 22, 2021 Verified Purchase

snap to repair and install new part work very good

auto feed spool works so good,excellent and professional service from your parts agent thanks

Guest - June 1, 2021 Verified Purchase

Love these cassettes

Thank you for your quick service

Guest - May 29, 2021 Verified Purchase

Repair items for Black and Decker weed trimmer

The 2 items order were received in a timely manner and worked very well.

Guest - May 28, 2021 Verified Purchase

Sort by:

• Highest Rating
• Most Recent

Product Information

Manufacturer: Black and Decker

Product Number: SF-080

Classification: Accessory

Weight: 0.11 lbs.

Shipping: Ships Worldwide

Repair Guides

Watch the Repair Video for Auto Feed Single Line Spool

monroehiscon.blogspot.com

Source: https://www.ereplacementparts.com/auto-feed-single-line-spool-p-1635113.html

Share this post